Phone: 940-668-9099
Email: info@wprtx.com

At WpR, we make tough, durable water crossings that last.

The durability is there because of the ¼-inch wall plate on every part of the unit. From the 12-inch by 6-inch by 1/4-inch wall box tubing at each end of the unit to the 3-inch by 8-inch by 1/4-inch wall box tubing flow through.

There are also 36-inch by 34-inch by 1/4-inch wall plates for a total of 1/2-inch wall of tread plate, and approach wings on each side for smooth transition.

This unit has a 20,000-pound D-ring in the center and is only 34 inches wide, so it's easy to load, stack and unload.

The water flow through exceeds the 10-inch pipe output.
Equation: each 3x8 box tubing = 288 cubic inch x 4 tubes = 1152cubic inch @ 12 inches deep x 10-inch pipe Diameter/ 10”x 12” deep = 942 cubic inch, for a total difference of: 210 cubic inches, the difference exceeds the Capacity of the 10-inch pipe by 22.3 percent.

We can build units like the Big 12 Water Crossing at any length or size you like. Also, ask about our low-profile unit.

WpR can convert the; solid weld ring lock, to a flanged unit for quick change on location.